Journal Articles
Journal Articles
[1]
J. H. Carvalho Everton and S. Erlingsson,
"Characterising the permanent deformation of subgrade soils under seasonal variation,"
Canadian journal of civil engineering (Print), vol. 52, no. 3, pp. 317-333, 2025.
[2]
J. Everton and S. Erlingsson,
"Characterising the resilient behaviour of unsaturated sandy soils under suction-controlled tests,"
Road Materials and Pavement Design, pp. 1-23, 2025.
[3]
J. Bergenudd, J.-M. Battini and R. Crocetti,
"Dynamic analysis of a pedestrian timber bridge considering the connections and pile foundations,"
Structures, vol. 74, 2025.
[4]
A. Shabani, D. Elaguine and M. Partl,
"Evaluating thermal contraction behaviour of basalt mastic using micromechanical finite element modelling,"
Road Materials and Pavement Design, 2025.
[5]
A. Aloisio et al.,
"Mechanical performance of pure-wood moment-resisting ridge joints with plywood gussets and wooden dowels,"
Engineering structures, vol. 334, 2025.
[6]
M. A. Afridi et al.,
"Predicting Pavement Condition Index Using an ML Approach for a Municipal Street Network,"
Journal of Transportation Engineering Part B: Pavements, vol. 151, no. 2, 2025.
[7]
J. Gao et al.,
"Research progress of bio-asphalt towards green pavement development : Preparation, properties, and mechanism,"
Fuel, vol. 381, 2025.
[8]
M. Debertolis et al.,
"Rope effect in mechanical panel-timber connections: A comparison between screws and dowels,"
Engineering structures, vol. 332, 2025.
[9]
M. Larsson, A. Niska and S. Erlingsson,
"Structural Stability of Cycle Paths : Introducing Cycle Path Deflection Bowl Parameters from FWD Measurements,"
Infrastructures, vol. 10, no. 1, 2025.
[10]
Z. Ma et al.,
"Study of the surface texture evolution and friction degradation in asphalt pavements during wear process,"
Wear, vol. 564, 2025.
[11]
E. Olsson et al.,
"A numerical framework for modelling settlements of railway ballast layers,"
TRANSPORTATION GEOTECHNICS, vol. 44, 2024.
[12]
A. Shabani, D. Elaguine and M. Partl,
"Advanced testing and characterization of low-temperature cracking in bitumen and mastic,"
Materials and Structures, vol. 57, no. 1, 2024.
[13]
Z. Tan et al.,
"Constitutive modelling and systematic evaluation of asphalt concrete’s viscoelastic tension-compression asymmetry effect on pavement performance,"
The international journal of pavement engineering, vol. 25, no. 1, 2024.
[14]
Y. Wang et al.,
"Design of birch plywood as gusset plates in timber-timber uniaxial tension connections : Influence of fastener pattern, face grain orientation, and discussions based on the Whitmore effective width theory,"
Journal of Building Engineering, vol. 86, 2024.
[15]
H. Yang et al.,
"Distributed electrified heating for efficient hydrogen production,"
Nature Communications, vol. 15, no. 1, 2024.
[16]
J. Bergenudd, J.-M. Battini and R. Crocetti,
"Dynamic analysis of a pedestrian timber truss bridge at three construction stages,"
Structures, vol. 59, 2024.
[17]
M. K. Etikan et al.,
"Experimental and numerical analyses of crushing resistance of unbound road materials,"
The international journal of pavement engineering, vol. 25, no. 1, 2024.
[18]
T. Wang et al.,
"Glulam beams adhesively bonded by birch plywood plates in moment-resisting beam-to-beam connections,"
Engineering structures, vol. 302, pp. 117471, 2024.
[19]
Y. Wang et al.,
"Glulam frame corner joints built of birch plywood and mechanical fasteners: An experimental, analytical, and numerical study,"
Engineering structures, vol. 310, 2024.
[20]
E. Mattsson et al.,
"Indicators of Sustainable Forestry: Methodological Approaches for Impact Assessments across Swedish Forestry,"
Sustainability, vol. 16, no. 8, 2024.
[21]
M. Miljković et al.,
"Microstructural analysis of the phase separation of epoxy-modified bitumen,"
Construction and Building Materials, vol. 451, 2024.
[22]
S. Ling et al.,
"Predicting the mechanical properties of semi-flexible pavement material with micromechanical modeling,"
Materials & design, vol. 239, 2024.
[23]
T. Wang et al.,
"Spreading angle analysis on the tensile capacities of birch plywood plates in adhesively bonded timber connections,"
Engineering structures, vol. 315, 2024.
[24]
S. Pajunen, R. Crocetti and X. Browne,
"Structural Timber System for Medium-to-Long Spans: The HB System Revisited,"
Journal of Architectural Engineering, vol. 30, no. 2, 2024.
[25]
A. Shabani et al.,
"Testing the influence of filler type and content on thermal cracking of mastic,"
Construction and Building Materials, vol. 457, 2024.
[26]
T. Wang et al.,
"Adhesively bonded joints between spruce glulam and birch plywood for structural applications: experimental studies by using different adhesives and pressing methods,"
Wood Material Science & Engineering, vol. 18, no. 3, pp. 1141-1150, 2023.
[27]
Y. Wang et al.,
"Birch plywood as gusset plates in glulam frame via mechanical connectors : A combined experimental and numerical study,"
Journal of Building Engineering, vol. 65, pp. 105744, 2023.
[28]
M. Larsson et al.,
"Condition assessment of cycle path texture and evenness using a bicycle measurement trailer,"
The international journal of pavement engineering, vol. 24, no. 1, 2023.
[29]
D. Saliko, A. Ahmed and S. Erlingsson,
"Development and validation of a pavement temperature profile prediction model in a mechanistic-empirical design framework,"
TRANSPORTATION GEOTECHNICS, vol. 40, pp. 100976, 2023.
[30]
J. Bergenudd et al.,
"Dynamic testing and numerical modelling of a pedestrian timber bridge at different construction stages,"
Engineering structures, vol. 279, 2023.
[31]
Y. Wang et al.,
"Embedment behavior of dowel-type fasteners in birch plywood : Influence of load-to-face grain angle, test set-up, fastener diameter, and acetylation,"
Construction and Building Materials, vol. 384, 2023.
[32]
S. Ling et al.,
"Experimental and numerical analyses on the fracture characteristics of cement-asphalt mastic-aggregate interface,"
Construction and Building Materials, vol. 401, 2023.
[33]
D. Elaguine et al.,
"Experimental and numerical modelling of shear bonding between asphalt layers,"
International Journal on Road Materials and Pavement Design, vol. 24, no. S1, pp. 176-191, 2023.
[34]
Z. Tan et al.,
"Multiscale characterization and modeling of aggregate contact effects on asphalt concrete's tension–compression asymmetry,"
Materials & design, vol. 232, 2023.
[35]
M. A. Afridi, S. Erlingsson and L. Sjogren,
"Municipal street maintenance challenges and management practices in Sweden,"
Frontiers in Built Environment, vol. 9, 2023.
[36]
Y. Yang et al.,
"Numerical analysis of hydroplaning and veer-off risk of dual-tyre on a wet runway,"
The international journal of pavement engineering, vol. 24, no. 1, 2023.
[37]
Z. Tan et al.,
"Numerical modeling of the mechanical response of asphalt concrete in tension and compression,"
Mechanics of materials, vol. 187, 2023.
[38]
H. Yin et al.,
"Susceptibility of surface-modified superhydrophobic wood and acetylated wood to mold and blue stain fungi,"
Progress in organic coatings, vol. 182, 2023.
[39]
Y. Wang et al.,
"Testing and analysis of screw-connected moment joints consisting of glued-laminated timbers and birch plywood plates,"
Engineering structures, vol. 290, 2023.
[40]
Z. Tan et al.,
"Virtual-specimen modeling of aggregate contact effects on asphalt concrete,"
Construction and Building Materials, vol. 400, 2023.
[41]
J. Žigon, M. S. Moghaddam and M. Wålinder,
"Wettability and surface interactions of natural and thermally modified beech wood with water and water-based coatings : the effect of surface pre-treatment type,"
European Journal of Wood and Wood Products, vol. 81, no. 1, pp. 73-88, 2023.
[42]
E. Mattsson et al.,
"A Conceptual Landscape-Level Approach to Assess the Impacts of Forestry on Biodiversity,"
Sustainability, vol. 14, no. 7, 2022.
[43]
S. Ling et al.,
"Damage characterization of pouring semi-flexible pavement material under triaxial compressive load based on X-ray computed tomography,"
Construction and Building Materials, vol. 348, 2022.
[44]
M. Larsson, A. Niska and S. Erlingsson,
"Degradation of Cycle Paths—A Survey in Swedish Municipalities,"
CivilEng, vol. 3, no. 2, pp. 184-210, 2022.
[45]
Y. Anderson-Skold et al.,
"Development of the SUNRA Tool to Improve Regional and Local Sustainability of the Transportation Sector,"
Sustainability, vol. 14, no. 18, pp. 11275, 2022.
[46]
A. Shabani and Gh. H. Hamedi,
"Effect of elastomer polymer on the moisture susceptibility of asphalt concrete,"
MAGAZINE OF CIVIL ENGINEERING, vol. 109, no. 1, 2022.
[47]
D. Saliko and S. Erlingsson,
"Evaluation of the structural response of two in-service thin flexible pavements under heavy vehicle loading during different seasons by built-in sensors,"
The international journal of pavement engineering, pp. 1-18, 2022.
[48]
S. Inozemtcev et al.,
"Experimental and numerical study on SMA modified with an encapsulated polymeric healing agent,"
Materials and Structures, vol. 55, no. 9, 2022.
[49]
Y. Wang et al.,
"Experimental investigation on mechanical properties of acetylated birch plywood and its angle-dependence,"
Construction and Building Materials, vol. 344, pp. 128277, 2022.
[50]
L. Xie et al.,
"Hysteretic Performance of Angle Steel Connections in a Timber-Concrete Composite System,"
BioResources, vol. 17, no. 1, pp. 1270-1284, 2022.