Tidskrifter
Tidskrifter
[1]
Z. Ma et al.,
"A dual-stage optimization approach for curing and performance in waterborne epoxy resin emulsified asphalt,"
Construction and Building Materials, vol. 504, 2025.
[2]
R. Li et al.,
"A state-of-the-art review on cold binders for sustainable paving materials,"
Cleaner Materials, vol. 18, 2025.
[3]
M. Debertolis et al.,
"Analytical, experimental and numerical investigation on full-scale glulam trusses joined through birch plywood gusset plates,"
Journal of Building Engineering, vol. 113, 2025.
[4]
J. H. Carvalho Everton och S. Erlingsson,
"Characterising the permanent deformation of subgrade soils under seasonal variation,"
Canadian journal of civil engineering (Print), vol. 52, no. 3, s. 317-333, 2025.
[5]
J. H. C. Everton och S. Erlingsson,
"Characterising the resilient behaviour of unsaturated sandy soils under suction-controlled tests,"
Road Materials and Pavement Design, s. 1-23, 2025.
[6]
Y. Wang et al.,
"Compare EN 383 and ASTM D5764 on the embedment properties of plywood : Influence of test setups, specimen geometry, and loading procedures,"
Construction and Building Materials, vol. 490, 2025.
[7]
M. K. Etikan et al.,
"Discrete element analysis on aggregate breakage of unbound granular road materials,"
Canadian journal of civil engineering (Print), vol. 52, no. 7, s. 1379-1390, 2025.
[8]
J. Bergenudd, J.-M. Battini och R. Crocetti,
"Dynamic analysis of a pedestrian timber bridge considering the connections and pile foundations,"
Structures, vol. 74, 2025.
[9]
M. A. Afridi och S. Erlingsson,
"Enhancing Municipal Pavement Condition Predictions Using Machine Learning Models,"
, 2025.
[10]
A. Shabani, D. Elaguine och M. Partl,
"Evaluating thermal contraction behaviour of basalt mastic using micromechanical finite element modelling,"
Road Materials and Pavement Design, 2025.
[11]
R. Tomasi et al.,
"Experimental and analytical investigation on timber connections with beech, birch and laminated densified wooden dowels,"
Construction and Building Materials, vol. 494, 2025.
[12]
Y. Wang et al.,
"Glued-in hardwood rods as reinforcements for compression perpendicular to the grain: Single fastener to global loading cases,"
Engineering structures, vol. 344, 2025.
[13]
T. Wang et al.,
"Innovative timber connection systems with the combination of indoor adhesive application and on-site adhesive-free assembly,"
Engineering structures, vol. 342, 2025.
[14]
A. Aloisio et al.,
"Mechanical performance of pure-wood moment-resisting ridge joints with plywood gussets and wooden dowels,"
Engineering structures, vol. 334, 2025.
[15]
Y. Wang et al.,
"Plywood gussets in mechanical timber connections : quantify the stress spread angles under major tension loads,"
European Journal of Wood and Wood Products, vol. 83, no. 4, 2025.
[16]
M. A. Afridi et al.,
"Predicting Pavement Condition Index Using an ML Approach for a Municipal Street Network,"
Journal of Transportation Engineering Part B: Pavements, vol. 151, no. 2, 2025.
[17]
Y. Wang et al.,
"Rebars as alternatives for smooth dowels in timber connections: An experimental, analytical and numerical study,"
Engineering structures, vol. 343, 2025.
[18]
J. Gao et al.,
"Research progress of bio-asphalt towards green pavement development : Preparation, properties, and mechanism,"
Fuel, vol. 381, 2025.
[19]
M. Debertolis et al.,
"Rope effect in mechanical panel-timber connections: A comparison between screws and dowels,"
Engineering structures, vol. 332, 2025.
[20]
M. Larsson, A. Niska och S. Erlingsson,
"Structural distress of cycle paths–the effect of heavy loading and groundwater table in full-scale testing,"
Road Materials and Pavement Design, s. 1-23, 2025.
[21]
M. Larsson, A. Niska och S. Erlingsson,
"Structural Stability of Cycle Paths : Introducing Cycle Path Deflection Bowl Parameters from FWD Measurements,"
Infrastructures, vol. 10, no. 1, 2025.
[22]
Z. Ma et al.,
"Study of the surface texture evolution and friction degradation in asphalt pavements during wear process,"
Wear, vol. 564, 2025.
[23]
E. Olsson et al.,
"A numerical framework for modelling settlements of railway ballast layers,"
TRANSPORTATION GEOTECHNICS, vol. 44, 2024.
[24]
A. Shabani, D. Elaguine och M. Partl,
"Advanced testing and characterization of low-temperature cracking in bitumen and mastic,"
Materials and Structures, vol. 57, no. 1, 2024.
[25]
T. Wang et al.,
"Bonding strength between spruce glulam and birch plywood at different load-to-plywood face grain angles,"
European Journal of Wood and Wood Products, vol. 82, no. 5, s. 1407-1419, 2024.
[26]
Z. Tan et al.,
"Constitutive modelling and systematic evaluation of asphalt concrete’s viscoelastic tension-compression asymmetry effect on pavement performance,"
The international journal of pavement engineering, vol. 25, no. 1, 2024.
[27]
Y. Wang et al.,
"Design of birch plywood as gusset plates in timber-timber uniaxial tension connections : Influence of fastener pattern, face grain orientation, and discussions based on the Whitmore effective width theory,"
Journal of Building Engineering, vol. 86, 2024.
[28]
H. Yang et al.,
"Distributed electrified heating for efficient hydrogen production,"
Nature Communications, vol. 15, no. 1, 2024.
[29]
J. Bergenudd, J.-M. Battini och R. Crocetti,
"Dynamic analysis of a pedestrian timber truss bridge at three construction stages,"
Structures, vol. 59, 2024.
[30]
Y. Wang et al.,
"Effect of moisture on the edgewise flexural properties of acetylated and unmodified birch plywood : a comparison of strength, stiffness and brittleness properties,"
European Journal of Wood and Wood Products, vol. 82, no. 2, s. 341-355, 2024.
[31]
M. K. Etikan et al.,
"Experimental and numerical analyses of crushing resistance of unbound road materials,"
The international journal of pavement engineering, vol. 25, no. 1, 2024.
[32]
T. Wang et al.,
"Glulam beams adhesively bonded by birch plywood plates in moment-resisting beam-to-beam connections,"
Engineering structures, vol. 302, s. 117471, 2024.
[33]
Y. Wang et al.,
"Glulam frame corner joints built of birch plywood and mechanical fasteners: An experimental, analytical, and numerical study,"
Engineering structures, vol. 310, 2024.
[34]
E. Mattsson et al.,
"Indicators of Sustainable Forestry: Methodological Approaches for Impact Assessments across Swedish Forestry,"
Sustainability, vol. 16, no. 8, 2024.
[35]
M. Miljković et al.,
"Microstructural analysis of the phase separation of epoxy-modified bitumen,"
Construction and Building Materials, vol. 451, 2024.
[36]
S. Ling et al.,
"Predicting the mechanical properties of semi-flexible pavement material with micromechanical modeling,"
Materials & design, vol. 239, 2024.
[37]
[38]
Y. Yang et al.,
"Smoothed particle hydrodynamics based numerical study of hydroplaning considering permeability characteristics of runway surface,"
Frontiers of Structural and Civil Engineering, vol. 18, no. 3, s. 319-333, 2024.
[39]
T. Wang et al.,
"Spreading angle analysis on the tensile capacities of birch plywood plates in adhesively bonded timber connections,"
Engineering structures, vol. 315, 2024.
[40]
E. Casanova et al.,
"Stochastic modelling of uncertainty in Chilean radiata pine wood beams subject to lateral torsional buckling,"
Wood Material Science & Engineering, 2024.
[41]
S. Pajunen, R. Crocetti och X. Browne,
"Structural Timber System for Medium-to-Long Spans: The HB System Revisited,"
Journal of Architectural Engineering, vol. 30, no. 2, 2024.
[42]
A. Shabani et al.,
"Testing the influence of filler type and content on thermal cracking of mastic,"
Construction and Building Materials, vol. 457, 2024.
[43]
T. Wang et al.,
"Adhesively bonded joints between spruce glulam and birch plywood for structural applications: experimental studies by using different adhesives and pressing methods,"
Wood Material Science & Engineering, vol. 18, no. 3, s. 1141-1150, 2023.
[44]
Y. Wang et al.,
"Birch plywood as gusset plates in glulam frame via mechanical connectors : A combined experimental and numerical study,"
Journal of Building Engineering, vol. 65, s. 105744, 2023.
[45]
M. Larsson et al.,
"Condition assessment of cycle path texture and evenness using a bicycle measurement trailer,"
The international journal of pavement engineering, vol. 24, no. 1, 2023.
[46]
D. Saliko, A. Ahmed och S. Erlingsson,
"Development and validation of a pavement temperature profile prediction model in a mechanistic-empirical design framework,"
TRANSPORTATION GEOTECHNICS, vol. 40, s. 100976, 2023.
[47]
J. Bergenudd et al.,
"Dynamic testing and numerical modelling of a pedestrian timber bridge at different construction stages,"
Engineering structures, vol. 279, 2023.
[48]
Y. Wang et al.,
"Embedment behavior of dowel-type fasteners in birch plywood : Influence of load-to-face grain angle, test set-up, fastener diameter, and acetylation,"
Construction and Building Materials, vol. 384, 2023.
[49]
S. Ling et al.,
"Experimental and numerical analyses on the fracture characteristics of cement-asphalt mastic-aggregate interface,"
Construction and Building Materials, vol. 401, 2023.
[50]
D. Elaguine et al.,
"Experimental and numerical modelling of shear bonding between asphalt layers,"
Road Materials and Pavement Design, vol. 24, no. S1, s. 176-191, 2023.