Skip to main content
To KTH's start page

Publications by Manufacturing and Metrology Systems

Here are the 50 latest publications from the Unit of Manufacturing and Metrology Systems.

[1]
B. Ganesh et al., "Towards a Circular Solution for Healthcare Plastic Waste : Understanding the Legal, Operational, and Technological Landscape," Recycling, vol. 10, no. 1, 2025.
[2]
P. Dunaj et al., "Stiffness-controlled lathe spindle for varying operating conditions," The International Journal of Advanced Manufacturing Technology, vol. 137, no. 9-10, pp. 4521-4535, 2025.
[3]
M. K. Gonzalez Bassante, "On the Accuracy of Articulated Robots : A Comprehensive Approach to Evaluate and Improve Robot Accuracy for Contact Applications," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2025:6, 2025.
[4]
M. P. Tay et al., "A simulation-based decision support tool for circular manufacturing systems in the automotive industry using electric machines as a remanufacturing case study," International Journal of Production Research, pp. 1-20, 2025.
[5]
J. Chen et al., "Fabrication and development of mechanical metamaterials via additive manufacturing for biomedical applications : a review," International Journal of Extreme Manufacturing, vol. 7, no. 1, 2025.
[6]
D. Spensieri et al., "Automatic planning and optimization of a laser radar inspection system," International journal of computer integrated manufacturing (Print), 2025.
[7]
E. Iunusova and A. Archenti, "Lab-to-Field Generalization Gap : Assessment of Transfer Learning for Bearing Fault Detection," Applied Sciences, vol. 15, no. 12, 2025.
[8]
M. Subasic et al., "Fatigue strength improvement of additively manufactured 316L stainless steel with high porosity through preloading," International Journal of Fatigue, vol. 180, 2024.
[9]
S. Amir et al., "Toward a Circular Economy: A Guiding Framework for Circular Supply Chain Implementation," in Springer Series in Supply Chain Management, : Springer Nature, 2024, pp. 379-404.
[10]
P. Dunaj and A. Archenti, "Modeling the dynamic interaction between machine tools and their foundations," Precision engineering, vol. 89, pp. 451-472, 2024.
[11]
Y. Zhu et al., "Surface roughness monitoring and prediction based on audible sound signal with the comparison of statistical and automatic feature extraction methods in turning process," in euspen's 24th International Conference & Exhibition, 10th – 14th June 2024, Dublin, Ireland, 2024.
[12]
A. Archenti et al., "Integrated metrology for advanced manufacturing," CIRP annals, vol. 73, no. 2, pp. 639-665, 2024.
[13]
F. M. Abdullah Asif and J. Gustafsson, "Feasibility Study of Integrating Remanufactured Gearboxes in Production Line of New Trucks (iReGear)," Stockholm : KTH Royal Institute of Technology, TRITA-ITM-RP, 2024:3, 2024.
[14]
A. Fredriksson and R. A. J. Valk, "Optimisation of Steel Plate Manufacturing : A Simulation-Based Approach to Enhancing Furnace Operations and Plate Sorting Efficiency," , 2024.
[15]
N. Salehi et al., "Towards circular manufacturing systems implementation : An integrated analysis framework for circular supply chains," Sustainable Production and Consumption, vol. 51, pp. 169-198, 2024.
[16]
Y. Zhu et al., "Surface quality prediction in-situ monitoring system: A deep transfer learning-based regression approach with audible signal," Manufacturing Letters, vol. 41, pp. 1290-1299, 2024.
[17]
J. Holmberg et al., "Machining of additively manufactured alloy 718 in as-built and heat-treated condition : surface integrity and cutting tool wear," The International Journal of Advanced Manufacturing Technology, vol. 130, no. 3-4, pp. 1823-1842, 2024.
[18]
D. Lipiński et al., "Experimental investigation and numerical analysis of material removal efficiency using abrasive microaggregates in grinding processes of Ti6Al4V," Precision engineering, vol. 91, pp. 476-488, 2024.
[19]
L. Bohdal et al., "Methods of Reducing Burrs in the Process of Cutting and Blanking Metal Materials," Rocznik Ochrona Srodowiska, vol. 26, pp. 629-637, 2024.
[20]
L. Zeyu et al., "A Systematic Approach to Optimize Parameters in Manufacturing Complex Lattice Structures of NiTi Using Electron Beam Powder Bed Fusion Process," Advanced Engineering Materials, vol. 26, no. 10, 2024.
[21]
M. Roci and A. Rashid, "Economic and environmental impact of circular business models : A case study of White Goods-as-a-Service using multi-method simulation modelling," Journal of Cleaner Production, vol. 407, 2023.
[22]
L. Zeyu, "Electron beam powder bed fusion of Nitinol : A development from production process window towards delicate structures," Doctoral thesis : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2023:35, 2023.
[23]
M. Gonzalez, B. Peukert and A. Archenti, "Assessment of Fault Detection and Monitoring Techniques for Effective Digitalization," in 33rd European Safety and Reliability Conference : The Future of Safety in a Reconnected World, 2023, p. 1705.
[24]
B. Łukasz et al., "Influence of tool geometry on residual stresses and strains in fine blanking process of electrical steel," in 25th International Conference on Computer Methods in Mechanics, 4-7 September 2023, Gliwice, Poland, 2023.
[25]
X. Zhao et al., "Effect of Scanning Strategy on Thermal Stresses and Strains during Electron Beam Melting of Inconel 625 : Experiment and Simulation," Materials, vol. 16, no. 1, 2023.
[26]
Y. Zhu, "Data augmentation based surface quality monitoring with machine learning models," in Manufacturing R&D Cluster Conference, Södertälje, May 9-10, 2023, 2023.
[27]
M. Gonzalez et al., "Influence of the velocity on quasi-static deflections of industrial articulated robots," The International Journal of Advanced Manufacturing Technology, vol. 125, no. 3-4, pp. 1429-1438, 2023.
[28]
V. Söderberg et al., "The effect of technology development on components machined in the current production system used by the OEMs in the truck industry," in 56th CIRP International Conference on Manufacturing Systems, CIRP CMS 2023, 2023, pp. 1588-1593.
[29]
S. Amir et al., "Towards circular economy : A guiding framework for circular supply chain implementation," Business Strategy and the Environment, vol. 32, no. 6, pp. 2684-2701, 2023.
[30]
A. de Giorgio et al., "Assessing the influence of expert video aid on assembly learning curves," Journal of manufacturing systems, vol. 62, pp. 263-269, 2022.
[31]
N. A. Theissen et al., "Towards quasi-static kinematic calibration of serial articulated industrial manipulators," in MED 2022 30th Mediterranean Conference on Control and Automation, 2022, pp. 872-877.
[32]
M. Roci et al., "Towards Circular Manufacturing Systems implementation : A Complex Adaptive Systems perspective using modelling and simulation as a quantitative analysis tool," Sustainable Production and Consumption, vol. 31, pp. 97-112, 2022.
[33]
A. Malakizadi et al., "Post-processing of additively manufactured metallic alloys – A review," International journal of machine tools & manufacture, vol. 179, no. 103908, 2022.
[34]
M. Roci, "Circular Manufacturing Systems: Complex systems modelling and simulation for enhanced decision-making," Doctoral thesis Stockholm : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2022:38, 2022.
[35]
L. Zeyu, S. Dadbakhsh and A. Rashid, "Developing processing windows for powder pre-heating in electron beam melting," Journal of Manufacturing Processes, vol. 83, pp. 180-191, 2022.
[36]
F. M. Abdullah Asif, N. Salehi and M. Lieder, "Consumer perceptions of circular business model : a case of leasing strollers," in Manufacturing Driving Circular Economy : Proceedings of the 18th Global Conference on Sustainable Manufacturing, October 5-7, 2022, Berlin, 2022, pp. 953-960.
[37]
X. Zhao et al., "Effect of scanning strategy on thermal stresses and strains during electron beam melting of Inconel 625: experiment and simulation," , 2022.
[38]
S. Dadbakhsh et al., "Process and geometrical integrity optimization of electron beam melting for copper," CIRP annals, vol. 71, pp. 201-204, 2022.
[39]
R. Mansour, S. Gillgren and S. Dadbakhsh, "Topology Optimization for Additive Manufacturing – A Numerical Study of Current Design Framework Capabilities and Limitations," in Advances in Transdisciplinary Engineering, 2022, pp. 592-603.
[40]
M. Roci et al., "Multi-method simulation modelling of circular manufacturing systems for enhanced decision-making," MethodsX, vol. 9, pp. 101709-101709, 2022.
[41]
J. A. Marwitz et al., "Accuracy Assessment of Articulated Industrial Robots using the Extended- and the Loaded-Double-Ball-Bar," Journal of Machine Engineering, vol. 22, no. 2, pp. 80-98, 2022.
[42]
N. A. Theissen, M. Gonzalez and A. Archenti, "Working vs. operating space kinematic calibration of articulated industrial manipulators," in European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, 2022, pp. 205-208.
[43]
M. Gonzalez et al., "Online compliance error compensation system for industrial manipulators in contact applications," Robotics and Computer-Integrated Manufacturing, vol. 76, pp. 102305-102305, 2022.
[44]
M. Gonzalez, N. A. Theissen and A. Archenti, "Experimental comparison of offline and online compliance compensation strategies for industrial articulated robots," in European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, 2022, pp. 213-216.
[45]
X. Zhao, "Additive manufacturing of Ni-based Superalloys- an analysis of parameter and strategy driven properties in Electron Beam Melting Process," Doctoral thesis Stockholm Sweden : KTH Royal Institute of Technology, TRITA-ITM-AVL, 2022:16, 2022.
[46]
R. Tomkowski, The Barkhasuen Noise Measurements : Good Practice Guide. 2nd ed. Stockholm : KTH Royal Institute of Technology, 2022.
[47]
M.-U. Rashid, R. Tomkowski and A. Archenti, "Effect of Surface Pre-Treatment on the Adhesion between HiPIMS Thick Cu:CuCNx Coating and WC-Co Shim," Coatings, vol. 12, no. 10, 2022.
[48]
R. Tomkowski et al., "Areal topography evaluation of a Ni-based alloy printed by electron beam melting (EBM) process," in European Society for Precision Engineering and Nanotechnology, Conference Proceedings : 22nd International Conference and Exhibition, EUSPEN 2022, 2022, pp. 433-436.
[49]
W. Yuan et al., "An Experimental Study of Micro-Dimpled Texture in Friction Control under Dry and Lubricated Conditions," Micromachines, vol. 13, no. 1, 2022.
[50]
M. Yang, X. Bao and L. Zeyu, "A STUDY ON THE BASIC PRINCIPLES OF METAPHORICAL THINKING IN MYTHOLOGICAL LANGUAGE AND THE CHANGES OF EMOTIONAL BEHAVIOR," International Journal of Neuropsychopharmacology, vol. 25, no. SUPPL 1, pp. A94-A94, 2022.
Full list in the KTH publications portal