Our 50 latest publications
[1]
A. Truncali et al.,
"Allylation and Thermosetting of Acetosolv Wheat Straw Lignin,"
ChemSusChem, vol. 18, no. 7, 2025.
[2]
G. Biscari et al.,
"Antimicrobial NIR-Responsive Hydrogels Based on Gellan Gum and Bis-MPA Polyester Dendrimers,"
ACS Applied Materials and Interfaces, vol. 17, no. 15, pp. 22448-22463, 2025.
[3]
P. Schwarzenberg et al.,
"Biomechanical Characterization of Metacarpal Fixation : Internal Load Determination and Evaluation of a Novel Adhesive Osteosynthesis,"
Journal of Orthopaedic Research, 2025.
[4]
M. J. Kadousaraei et al.,
"Bioprinting of mesenchymal stem cells in low concentration gelatin methacryloyl/alginate blends without ionic crosslinking of alginate,"
Scientific Reports, vol. 15, no. 1, 2025.
[5]
G. Ranjani et al.,
"Chemically Recyclable and Enzymatically Degradable Thermostable Polyesters with Inherent Strain from α-Pinene-Derived Chiral Diols,"
ACS Sustainable Chemistry and Engineering, vol. 13, no. 18, pp. 6696-6705, 2025.
[6]
X. Lopez-Lorenzo, G. Ranjani and P.-O. Syrén,
"Conformational Selection in Enzyme-Catalyzed Depolymerization of Bio-based Polyesters,"
ChemBioChem, vol. 26, no. 2, 2025.
[7]
P. M.N. Cameron et al.,
"Cyclic testing reliability analysis on a novel light-curable bone fixation technique,"
Frontiers in Bioengineering and Biotechnology, vol. 13, 2025.
[8]
Å. Jerlhagen et al.,
"Decoding in-plane orientation in cellulose nanopapers hybridized with tailored polymeric nanoparticles,"
Nanoscale, vol. 17, no. 14, pp. 8712-8723, 2025.
[9]
S. Sun,
"Enzymatic depolymerization of polyamides (nylons): current challenges and future directions,"
Polymer degradation and stability, vol. 238, 2025.
[10]
L. Pezzana et al.,
"Exploiting epoxy-based monomers from biobased ferulic acid and furfuryl amine for a new set of bio-derived materials,"
Reactive & functional polymers, vol. 216, 2025.
[11]
M. Cattaruzza et al.,
"Hybrid polymer-liquid lithium ION electrolytes : Effect of carbon black during polymerization-induced phase separation,"
Polymer, vol. 326, 2025.
[12]
T. Colding-Rasmussen et al.,
"Novel Customizable Fracture Fixation Technique vs. Conventional Metal Locking Plate : An Exploratory Comparative Study of Fixation Stability in an Experimental In Vivo Ovine Bilateral Phalangeal Fracture Model,"
Materials, vol. 18, no. 14, 2025.
[13]
J. Sjöström et al.,
"Oxlignin : A Novel Type of Technical Lignin from Kraft Pulp Mills,"
ACS Omega, vol. 10, no. 18, pp. 18784-18792, 2025.
[14]
J. San Jacinto García et al.,
"Photo-Curable Triazinetrione Composites With Tunable Degradation for Fracture Stabilization and Flexible Thin-Film Applications,"
Journal of Applied Polymer Science, 2025.
[15]
A. Eliasson et al.,
"Pulp fiber-based composites with plasticized starch via high-shear mixing,"
Carbohydrate Polymer Technologies and Applications, vol. 11, 2025.
[16]
N. Sanz del Olmo et al.,
"Responsive Organoselenium Dendritic Polymers : From Monodisperse Dendrimers to Self-Assembled Micelles for Advanced Therapeutic Applications,"
Journal of the American Chemical Society, 2025.
[17]
R. J. Quinn et al.,
"Adjunctive fixation of the humeral epicondyle in a lateral condylar fracture model : Ex vivo comparison of pins and plates with a novel composite (AdhFix),"
Veterinary surgery, vol. 53, no. 2, pp. 311-319, 2024.
[18]
C. Fang et al.,
"An Autoclavable and Transparent Thermal Cutter for Reliably Sealing Wet Nanofibrous Membranes,"
Nano Letters, vol. 24, no. 28, pp. 8709-8716, 2024.
[19]
N. Sanz del Olmo et al.,
"Antibacterial Hydrogel Adhesives Based on Bifunctional Telechelic Dendritic-Linear-Dendritic Block Copolymers,"
Journal of the American Chemical Society, vol. 146, no. 25, pp. 17240-17249, 2024.
[20]
T. Todorovic et al.,
"Chitosan-graft-poly(vinyl acetate) for wood-adhesive applications,"
International Journal of Adhesion and Adhesives, vol. 135, 2024.
[21]
X. Lopez-Lorenzo et al.,
"Degradation of PET microplastic particles to monomers in human serum by PETase,"
Faraday discussions, vol. 252, pp. 387-402, 2024.
[22]
S. Subramaniyan et al.,
"Designing from biobased to closed-loop circularity: Flexible dynamic polyimine-amide networks,"
Chemical Engineering Journal, vol. 501, 2024.
[23]
P. Schwarzenberg et al.,
"Determination of the internal loads experienced by proximal phalanx fracture fixations during rehabilitation exercises,"
Frontiers in Bioengineering and Biotechnology, vol. 12, 2024.
[24]
T. Chang et al.,
"Effect of blue light illumination on atmospheric corrosion and bacterial adhesion on copper,"
Corrosion Science, vol. 230, 2024.
[25]
J. San Jacinto García et al.,
"Enhanced Degradability of Thiol–Ene Composites through the Inclusion of Isosorbide-Based Polycarbonates,"
ACS Applied Materials and Interfaces, vol. 16, no. 30, pp. 40056-40068, 2024.
[26]
A. Truncali et al.,
"Epoxidized technical Kraft lignin as a particulate resin component for high-performance anticorrosive coatings,"
JCT Research, vol. 21, no. 6, pp. 1875-1891, 2024.
[27]
G. Biscari et al.,
"Gellan gum-dopamine mediated in situ synthesis of silver nanoparticles and development of nano/micro-composite injectable hydrogel with antimicrobial activity,"
International Journal of Biological Macromolecules, vol. 258, 2024.
[28]
L. B. Hurtado et al.,
"Genipap Oil as a Natural Cross-Linker for Biodegradable and Low-Ecotoxicity Porous Absorbents via Reactive Extrusion,"
Biomacromolecules, vol. 25, no. 12, pp. 7642-7659, 2024.
[29]
Q. Zhang et al.,
"Industrial Kraft Lignin Based Binary Cathode Interface Layer Enables Enhanced Stability in High Efficiency Organic Solar Cells,"
Advanced Materials, vol. 36, no. 9, 2024.
[30]
R. Andersson et al.,
"Influence of Molecular Weight and End Groups on Ion Transport in Weakly and Strongly Coordinating Polymer Electrolytes,"
ChemElectroChem, vol. 11, no. 20, 2024.
[31]
T. Todorovic et al.,
"Locust bean gum as an adhesive for wood particleboards,"
Industrial crops and products (Print), vol. 208, pp. 117841, 2024.
[32]
V. A. Yiga et al.,
"Modified rice husk as component in recyclable and biodegradable epoxy thermosets,"
Discover Applied Sciences, vol. 6, no. 4, 2024.
[33]
D. Zenkert et al.,
"Multifunctional carbon fibre composites using electrochemistry,"
Composites Part B : Engineering, vol. 273, 2024.
[34]
L. Pezzana et al.,
"Multiple approaches to exploit ferulic acid bio-based epoxy monomer for green thermoset,"
Industrial crops and products (Print), vol. 212, 2024.
[35]
A. Wärnheim et al.,
"Nanomechanical and nano-FTIR analysis of polyester coil coatings before and after artificial weathering experiments,"
Progress in organic coatings, vol. 190, 2024.
[36]
Å. Johansen et al.,
"Photo-Clickable Triazine-Trione Thermosets as Promising 3D Scaffolds for Tissue Engineering Applications,"
Advanced Healthcare Materials, vol. 13, no. 27, 2024.
[37]
C. Harder et al.,
"Poly(sobrerol methacrylate) Colloidal Inks Sprayed onto Cellulose Nanofibril Thin Films for Anticounterfeiting Applications,"
ACS Applied Nano Materials, vol. 7, no. 9, pp. 10840-10851, 2024.
[38]
N. Bidarvandi et al.,
"Preparation of green-stretchable hydrogel based on succinic acid-based monomer with antibacterial properties,"
Polymer Plastics Technology and Materials, vol. 63, no. 13, pp. 1769-1779, 2024.
[39]
Å. Jerlhagen, O. R. Wilson and E. Malmström,
"Self-Catalyzed Hydrolysis of Nitrile-Containing RAFT Chain-Transfer Agent and Its Impact upon Polymerization Control of Methacrylic Monomers,"
ACS Macro Letters, vol. 13, no. 5, pp. 565-570, 2024.
[40]
L. Ahrenstedt et al.,
"Sustained zero-order release of dexamethasone after incorporation into crosslinked PEG-dendrons using click reactions,"
Journal of Drug Delivery Science and Technology, vol. 95, 2024.
[41]
A. Singh et al.,
"Synthesis, evaluation and modification of heterofunctional polyester dendrimers with internally queued bromide groups,"
Soft Matter, vol. 20, no. 38, pp. 7573-7577, 2024.
[42]
M. Mousa et al.,
"Thermally expandable microspheres based on fully or partially bio-based polymers,"
Journal of Applied Polymer Science, vol. 141, no. 20, 2024.
[43]
G. Patt-Lafitte et al.,
"Toughening and strengthening of visible light-cured hydroxyapatite thiol-ene resin composite intended as bone fixation using 2D textile,"
Journal of Materials Research and Technology, vol. 29, pp. 982-990, 2024.
[44]
E. Söderberg et al.,
"Toward safer and more sustainable by design biocatalytic amide-bond coupling,"
Green Chemistry, vol. 26, no. 22, pp. 11147-11163, 2024.
[45]
S. Emilsson, G. Lindbergh and M. Johansson,
"Tuneable and efficient manufacturing of Li-ion battery separators using photopolymerization-induced phase separation,"
Journal of Materials Chemistry A, vol. 12, no. 44, pp. 30442-30453, 2024.
[46]
A. E. Alexakis et al.,
"2-Methoxy-4-Vinylphenol as a Biobased Monomer Precursor for Thermoplastics and Thermoset Polymers,"
Polymers, vol. 15, no. 9, 2023.
[47]
B. A. Nebel et al.,
"A Career in Catalysis : Bernhard Hauer,"
ACS Catalysis, vol. 13, no. 13, pp. 8861-8889, 2023.
[48]
H. Liu et al.,
"Advance in oral delivery of living material,"
Biomedical Technology, vol. 3, pp. 26-39, 2023.
[49]
A. E. Alexakis, O. R. Wilson and E. Malmström,
"Bimodal nanolatexes prepared via polymerization-induced self-assembly : losing control in a controlled manner,"
Polymer Chemistry, vol. 14, no. 19, pp. 2308-2316, 2023.
[50]
P. Schwarzenberg et al.,
"Biomechanical performance of a novel light-curable bone fixation technique,"
Scientific Reports, vol. 13, no. 1, 2023.