Skip to main content
To KTH's start page To KTH's start page

Biobased carbon fibers from solution spun lignocellulosic precursors

Time: Fri 2022-12-02 10.00

Location: F3, Lindstedtsvägen 26 & 28, Stockholm

Language: English

Subject area: Fibre and Polymer Science

Doctoral student: Andreas Bengtsson , Fiber- och polymerteknologi, RISE Research Institutes of Sweden AB, Monica Ek

Opponent: Professor Johannes Ganster, Fraunhofer IAP

Supervisor: Professor Monica Ek, Fiber- och polymerteknologi, Wallenberg Wood Science Center; Dr Maria Sedin, RISE Research Institutes of Sweden AB; Docent Elisabet Brännvall, Ingenjörspedagogik; Docent Elisabeth Sjöholm, Fiber- och polymerteknologi

Export to calendar

QC 2022-11-07


Carbon fibers (CFs) have excellent mechanical properties and a low density, making themattractive as a reinforcing fiber in composites. The use of CFs is limited to high-end applications,since they are produced from an expensive fossil-based precursor via an energy-intensivemanufacturing process, explaining the need for cheaper CFs from renewables. CFs can be madefrom strong cellulosic precursors, but the low carbon content of cellulose results in a lowconversion yield, and thus an expensive CF. Lignin has a higher carbon content than cellulose butCFs from melt spun lignin precursors have presented challenges, since these precursors have a lowstrength and are difficult to convert to CF in a realistic conversion time.In the present work, CFs from solution spun precursors consisting of blends of softwood kraftlignin and cellulose have been developed. The lignin-cellulose precursors (up to 70% lignin) wereprepared with air-gap spinning and wet spinning, using an ionic liquid and a water-based solventsystem for co-dissolution, respectively. Co-processing of cellulose and lignin was beneficial as theformer made the precursor strong and easy to handle, whereas the latter gave a higher conversionyield than precursors based solely on cellulose. The precursors were converted to CFs via bothbatchwise and continuous conversion, using industrially relevant times (< 2 h), with a yield up to45 wt% after incorporation of a flame retardant.These CFs have a moderate Young’s modulus and tensile strength up to 75–77 GPa and 1.2 GPa,respectively, i.e. similar to the values for CFs from fossil-based isotropic pitch and they can thusbe classified as general-grade CFs. These biobased CFs have a disordered turbostratic graphitestructure, and their tensile properties are affected by the precursor structure, the conversionconditions, and the final diameter. These CFs can potentially be used as a sustainable componentin non-structural and semi-structural applications.