Skip to main content
To KTH's start page

Dynamic analysis of end-shield bridges considering soil-structure interaction

Time: Fri 2024-10-18 13.00

Location: M108, Brinellvägen 23, Stockholm

Video link: https://kth-se.zoom.us/j/69844892559

Language: English

Subject area: Civil and Architectural Engineering, Structural Engineering and Bridges

Doctoral student: Seyed Amin Hosseini Tehrani , Bro- och stålbyggnad, Structural Engineering and Bridges

Opponent: Associate Professor Gunnstein Thomas Frøseth, NTNU

Supervisor: Professor Battini Jean-Marc, Bro- och stålbyggnad; Dr. Abbas Zangeneh Kamali, Bro- och stålbyggnad, ELU Konsult AB; Researcher Andreas Andersson, Bro- och stålbyggnad

Export to calendar

QC 240923

Abstract

This thesis investigates the effect of Soil-Structure Interaction (SSI) on the dynamic response of railway bridges with integrated retaining walls, referred to as end shield bridges, numerically and experimentally. The research aims to determine how surrounding soils influence the dynamic behavior of the system and their impact on high-speed train passage. The effect of uncertainties related to soil properties is examined, and simplified modeling techniques for incorporating SSI in the analysis of railway bridges are proposed. For this purpose, four railway bridges with end shields, including two single-span and two three-span structures, are equipped with numerous accelerometers and excited using a hydraulic actuator across various frequencies and load amplitudes.

In Paper I, a simplified 2D beam model of a three-span railway bridge, considering SSI only at the end shields, is presented. The effects of neglecting the backfill soil and removing the cantilever sections during high-speed train passage are investigated. It is shown that excluding the backfill soil leads to a significant increase in the acceleration response of the bridge due to the impact load effects of the train, and an acceptable alternative to not modeling the soil is to remove the cantilever parts of the bridge.

In Paper II, the impact of surrounding soils on the dynamic behavior of the same three-span railway bridge is studied in depth. A full 3D model of the railway bridge-soil system is created in the FE software and calibrated to the experimental data using the Frequency Response Functions (FRFs) at each sensor location. To assess the dynamic effect of surrounding soils, different models without soil components are created. It is observed that excluding soil can lead to a significant shift in the natural frequencies of the structure, particularly for higher modes, and a substantial increase in FRF amplitude.~Furthermore, high-speed train passage analysis indicates that removing soil can dramatically enhance the resonance response of the bridge.

In Pape III, simplified 3D solid and 2D beam modeling alternatives for end shield bridges are proposed. In the simplified 3D solid model, the influence of the backfill soil is introduced through distributed springs and dashpots derived from simple equations. In the simplified 2D beam model, the dynamic effect of the backfill soil is derived from the impedance functions of the soil medium. The performance of these simplified models is then compared to the calibrated 3D models in terms of the modal properties of the first bending mode and the maximum acceleration response during high-speed train passage. The results show that the simplified models closely align with the calibrated models, proving to be simple and efficient alternatives for practical use in bridge design.

urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-353701