Skip to main content
To KTH's start page

Questions and answers for teachers and staff

SCI is not starting from scratch. We actively draw on experience from makerspaces at KTH, in Sweden and internationally, and adapt it to SCI’s programmes. The answers below describe the intended direction. Where something has not yet been decided, the answer says so, and detailed procedures will be published once they have been finalised.

Each answer is labelled Facts and decisions, In planning or Guidance; see Terms.

Facts at a glance
Location Teknikringen 8, KTH Campus
Opening Planned for late September 2027
For whom Everyone at KTH, with a focus on SCI’s first- and second-cycle education
Opening hours Not yet decided – will be published before the opening
Course costs Not yet decided – see question 20
Current status Under construction – procedures will be published once finalised
Contact Director [name, email]

Are you a student? Read the questions and answers for students.

Planning a course activity? Start with questions 17 (getting started, with checklist), 18 (capacity), 19 (supervision), 20 (costs) and 32 (support for teachers).

Themes

The basics

1. What is a makerspace – isn’t it just a workshop?

Status: Guidance

It is more than a workshop. A makerspace is a shared learning environment where students develop ideas, build, test and learn together. Equipment, workspaces and supervision support both course activities and students’ own projects, at first-cycle and second-cycle level. The emphasis is on students’ own making and learning, not on producing things for others. The space includes design and fabrication, but also analysis, programming, discussion and feedback. It is also a meeting place across programmes, years and disciplines.

Read more: KTH: Makerspaces – a pedagogical tool · Examples from other universities: Georgia Tech: article on the Invention Studio (PDF, 2014)

2. Is a makerspace the same as a lab session in physics or mechanics?

Status: Guidance

No. A makerspace is a place for learning, while a lab session is a way of teaching – guided or open. Lab sessions develop, among other things, experimental skills, measurement methods, understanding of models and analysis. In CDIO activities, disciplinary knowledge is linked to developing, building, testing and using solutions based on a need. Both can be teacher-led, and lab sessions can include construction. The difference lies mainly in learning outcomes and context, not in the degree of freedom or the room. SCI MakerSpace does not replace lab sessions; they have their own value, on their own or as one step in a CDIO chain from idea to finished solution.

Term
CDIO stands for Conceive, Design, Implement, Operate – going from a need and an idea to development, implementation and use.

In depth: typical emphases in lab sessions and CDIO activities
Aspect Lab session – typical emphasis CDIO activity – typical emphasis
Learning outcomes Experimental skills, understanding of models and phenomena Disciplinary knowledge applied in a solution based on a need
Typical result Measurement data, analysis and conclusions Prototype, product, process or system tested against requirements
Level of structure From guided to open From guided to open
Can also include Own experimental design and construction Experiments, measurements and given subtasks

Research support: Holmes and Wieman: Introductory physics labs (2018) · Read more: CDIO Standards in Swedish (PDF)

3. What can a typical activity in a makerspace look like?

Status: Guidance

An illustrative example: a student group develops a measurement system for a real need. The group formulates requirements, chooses a measurement principle and can use AI to get suggestions for code or solutions. The suggestions are discussed in the group and with a supervisor before the group builds a prototype and tests it against measured data. In the same room, another group does calculations on a model, while a third troubleshoots electronics. The groups show their solutions and give each other feedback. How supervision and examination are designed is decided in each course.

Read more: KTH Flemingsberg: Spaces · Research support: OsloMet: maker-centred learning across subjects (2026)

4. Is SCI the first to do this – are we starting from scratch?

Status: Facts and decisions

No. In 2000, KTH co-founded the CDIO Initiative together with MIT, Chalmers and Linköping University. CDIO is an educational framework, not a makerspace, but it puts design, building and testing at the centre of engineering education. KTH’s pilot was Vehicle Engineering, today part of SCI. University makerspaces have since become common: Aalto Design Factory opened in 2008, Georgia Tech’s Invention Studio in 2009 and DTU Skylab started in 2013. Within KTH, Spaces in Flemingsberg has existed since 2019. SCI builds on the combined experience at KTH, nationally and internationally.

Read more: The CDIO Initiative (PDF) · Examples from other universities: Aalto Design Factory

5. Why does SCI need its own makerspace when KTH is building a central one?

Status: Facts and decisions

Because KTH is building a network: the central hub provides breadth, while SCI MakerSpace can be linked more closely to SCI’s courses, lab sessions and research environments. KTH Central Makerspace in KTH Library will be a shared hub, and the schools are developing spaces focused on their own programmes and research areas. The hub also provides shared resources and meetings across schools. KTH Makerspace Network coordinates, among other things, safety work and introduction materials. A similar network model exists at MIT, where many makerspaces are coordinated in a common system.

Read more: KTH Makerspace Network · Examples from other universities: MIT Project Manus

6. How does SCI MakerSpace differ from other spaces at KTH – and where do I turn if something is missing?

Status: Guidance

SCI MakerSpace is the space in KTH’s network that is linked to SCI’s courses and programmes. If something is missing, another space in the network may be able to help, by agreement. The others are KTH Central Makerspace in KTH Library, an open hub for everyone at KTH planned to open in spring 2027, other schools’ makerspaces, workshops and the departments’ labs. Workshops, such as the EECS workshop, which Aerospace Engineering and others use, focus on fabrication and machining but also support courses and projects. The departments’ labs are used for research and lab sessions and have their own safety rules. Each space may require its own safety training, so start in good time.

In depth: KTH’s spaces compared
Space Typical focus Who can use it
SCI MakerSpace, Teknikringen 8 Design-implement activities in courses, mainly in SCI’s programmes, as well as personal projects and student associations; planned to open in late September 2027 Everyone at KTH after an introduction and safety training, with a focus on SCI’s programmes
KTH Central Makerspace, KTH Library Open drop-in hub, breadth and meetings across schools; planned to open in spring 2027 Students and staff at KTH
Other schools’ makerspaces, for example Spaces in Flemingsberg and Middla (EECS) Electronics, prototypes and software linked to the school’s programmes; KTH Innovation is also present in Flemingsberg According to each space’s rules
Workshops, for example the EECS workshop, the AlbaNova workshop and KTH Prototype Center Fabrication and machining, often supported by workshop staff; also used in courses and projects According to the workshop’s rules, often after safety training
Departmental labs Research and lab sessions in courses According to the lab’s safety rules – not freely open

Read more: Explore KTH’s makerspaces · KTH Makerspace Network

7. Isn’t it enough for SCI MakerSpace to be available to those who want to use it?

Status: Guidance

No, not if every student is to have the opportunity. Under KTH’s operational plan for 2026–2028, all students are to have access to experimental learning environments. Several KTH programmes report that voluntary use mainly reaches those already interested, and one study shows that students required to use a makerspace in a course were more likely to use it on their own as well. A course activity reaches everyone, if everyone gets an introduction and a chance to practise. This does not mean every course should use SCI MakerSpace; experimental learning can also be digital or happen in the subject’s own labs, see question 13. Voluntary use remains a complement; see question 11.

Research support: Hilton et al. (2018): why students get involved · Read more: KTH: Makerspaces – a pedagogical tool

8. What role does AI play in SCI MakerSpace in practice?

Status: In planning

AI is one of the main reasons for the initiative, and SCI MakerSpace is planned with GPU stations – powerful computers for machine learning – where students can connect AI to physical systems. AI then becomes both a tool and part of the course content. Students can, for example, train a model on data from their own measurement setup, or let AI suggest code and designs that are then tested in the real world. Other university makerspaces already build in generative AI. Who may use the GPU stations, how they are booked and whether they suffice for whole course groups has not yet been decided; for larger computations, KTH Cloud may be more suitable. See also questions 24 and 40.

Read more: Facilities and equipment · Examples from other universities: ASEE 2025: AI in academic makerspaces

9. What is planned before the opening, and what will develop over time?

Status: In planning

Safety, introduction, access, capacity, staffing and course integration are being planned before the opening; the rest will develop based on teachers’ and students’ needs and experiences. What an activity requires must be in place before it runs, and procedures will be communicated once decided. This is how established makerspaces have grown: DTU Skylab started in 2013 as a small pilot initiative and has been expanded in several stages, and Sheffield’s iForge was expanded in response to student demand.

Examples from other universities: DTU Skylab: about Skylab and its expansion · Sheffield iForge: expansion driven by demand

The students

10. Have students been involved in the work?

Status: Facts and decisions

Yes, from the start. Student representatives have taken part in workshops, and several student associations – including Formula Student, AESIR, ÄGIR, Aero Design Team and AI Student Society – have been involved since the work began. Their experiences and needs are part of the basis for the planning. Student involvement is established practice at other universities: Georgia Tech’s Invention Studio is staffed by student instructors, and Sheffield’s iForge was founded by students and staff together.

Examples from other universities: Georgia Tech: Invention Studio · Sheffield iForge

11. Can students use SCI MakerSpace outside regular courses?

Status: In planning

Yes, personal projects and student associations are part of the focus – but access, opening hours and priorities have not yet been decided. The focus also includes course activities such as project courses and degree projects, and the rules will be communicated once decided. The combination of course activities and students’ own initiatives exists at several established makerspaces, for example ETH Zürich’s Student Project House and Chalmers Fuse.

Examples from other universities: ETH Student Project House · Chalmers Fuse

Building SCI MakerSpace into a course

12. How long will SCI MakerSpace exist – can I redesign my course without the initiative disappearing?

Status: In planning

How long, and in what way, SCI MakerSpace will be funded has not yet been decided, but you can limit the risk for your course. The space is being built in dedicated premises at Teknikringen 8 and is part of KTH’s decision that the schools’ makerspaces are to be integrated into education. Start with a limited activity built on the learning outcomes and standard maker equipment, not on a particular machine. The activity is then easier to move, although this must be agreed with the other space. DTU Skylab, too, started small in 2013 and has since been expanded.

Read more: KTH Makerspace Network · Examples from other universities: DTU Skylab: about Skylab and its expansion

13. Is SCI MakerSpace relevant for my programme if we do not build hardware?

Status: Guidance

Yes, it can be, since experimental work is not only about hardware – but the course’s learning outcomes decide, and not every programme needs to use the space equally. It can mean numerical experiments, software testing and analysis of real data. Several programmes already have computing environments, simulators or their own labs that suit some goals better. So ask yourself what SCI MakerSpace adds: workspaces, technical support or the chance to connect a model to measurements. In mathematics, students can compare a simulation with a simple experiment. In nuclear energy engineering, an activity can involve measurement systems and data collection, while radiation sources stay in the regular labs. If an activity adds nothing, leave it out.

Read more: KTH: Makerspaces – a pedagogical tool · Examples from other universities: TU Delft (Delta, 2020): lab courses and a makerspace in applied physics

14. Does SCI MakerSpace take resources from regular courses and labs?

Status: In planning

It is too early to say, since long-term funding has not been decided (see question 12) – but the intention is not to move subject-specific equipment out of the departments. The idea is to gather what many courses need – workspaces, hand tools, 3D printers and laser cutters – in one place with shared operation, rather than each department paying for it. Several programmes ask for this, and a similar approach lies behind MIT’s network of makerspaces. Nor does SCI MakerSpace replace lab sessions; see questions 2 and 27. Costs for course activities are covered in question 20.

Read more: KTH Makerspace Network · Examples from other universities: MIT Project Manus

15. Can I use SCI MakerSpace in my course – even if it is theoretical?

Status: Guidance

Yes, if it supports the course’s learning outcomes. You do not need to redesign the whole course – a limited activity is enough to start with. It can be a short prototyping exercise, a design task that builds on a lab session, or a larger project. In a theoretical course, students can for example design and build a simple measuring instrument themselves instead of using a ready-made setup. TU Delft built a makerspace for applied physics in 2020, and educational pilots are under way at all KTH schools.

Read more: KTH Makerspace Network · Examples from other universities: TU Delft (Delta, 2020): lab courses and a makerspace in applied physics

16. There is no room in the programme – where are the credits supposed to come from?

Status: Guidance

Usually by replacing, not adding. An activity in SCI MakerSpace can replace an existing assignment, lab session or presentation with the same learning outcomes. Open Entrance, for example, has proposed a project of about 1.5 credits in SA1007 that would replace an oral final presentation and a writing assignment on the history of technology; see question 22. A well-designed activity can also address several programme goals at once, such as subject knowledge, sustainability, gender equality, diversity and equal treatment, teamwork and responsible use of AI. The programme’s goal matrix shows which goals the activity can assess; CDIO calls this an integrated curriculum. Existing project courses are often the easiest place to start. See also question 35.

Read more: CDIO Standards in Swedish (PDF) · Examples from other universities: DTU: article on CDIO projects in the B.Eng. programmes (PDF)

17. How do I get started – whom do I contact, and how much notice is needed?

Status: Guidance

Contact the director of SCI MakerSpace, [name and email], preferably as soon as you start planning the next course offering. You need neither a finished idea nor previous experience. The notice period has not yet been decided, but times, introduction, supervision and materials need to be agreed before the timetable is set. Start from the course’s learning outcomes and begin with a manageable activity. The checklist below shows what is useful to think about before the conversation; it is a support, not an established procedure. Booking procedures will be published on the page Access and introduction. Programme directors who want to plan for the whole programme follow the same route.

In depth: checklist for discussing a course activity
  • Which learning outcomes should the activity support?
  • How many students and groups, in which study period and at what times?
  • Which activities, equipment and materials are needed?
  • Which introduction and safety training (maker licence) do the students and supervisors need?
  • What will SCI MakerSpace staff contribute, and what supervision will the course provide?
  • What costs arise, and who covers them?
  • How can everyone take part, regardless of previous knowledge and needs?
  • What is the back-up plan if the space or equipment is not available?

Not everything needs to be settled at the first conversation. Everything the activity requires – times, introduction, staffing and supervision, materials, safety and costs – must, however, be confirmed before it takes place.

Examples from other universities: Lawrence University: makerspace pedagogy – how and why (blog, 2019) · DTU Skylab: course agreement (PDF)

18. Will there be room for all activities – and how many students can the space take at once?

Status: In planning

It has not yet been decided how many students the space can take at once, or how time will be divided between courses and personal projects. Capacity depends on workstations, machine time, introductions, supervision, risk level and timetable. Possible solutions for 80–200 students are for groups to take turns in timetabled sessions, do computer work such as CAD and analysis elsewhere and book short machine slots; at TU Delft, for example, students booked short slots in 2020. Discuss the set-up with the director before the course is timetabled, and agree on staffing, costs and a back-up plan. Courses may need priority at certain times. Capacity and booking conditions will be published once decided.

Examples from other universities: DTU Skylab: course agreement (PDF) · TU Delft (Delta, 2020): lab courses and a makerspace in applied physics

19. Who supervises – what do the staff provide, and what must the course provide itself?

Status: In planning

The starting point in the planning is that the staff handle the technology and the course handles the subject. The staff then provide introductions, safety training, authorisations, technical support and maintenance. The course provides subject supervision and examination, normally with its own teachers or teaching assistants present. Many established makerspaces work this way. Staff presence per session has not yet been decided, and the number of supervisors depends on group size and risk level. If an activity needs more supervisors than the course has, that is a resource question for the planning, not for the individual teacher. Teaching assistants who supervise should take the same introduction as the students. See also question 38.

Examples from other universities: Stanford: making@stanford · Georgia Tech: Invention Studio

20. What does it cost my course – and who pays for premises, operation, materials and supervision?

Status: In planning

It has not yet been decided what a course activity will cost or who pays for what. Before a course activity, you therefore need to agree on five cost items: premises and basic equipment, operation and maintenance, consumables, SCI MakerSpace staff, and the course’s own supervision. Getting access to the space says nothing about what materials cost, and the fact that KTH Central Makerspace is planned to be free of charge does not mean the same conditions apply in SCI MakerSpace. Contact the director during course planning, before you redesign the course, to find out what has been decided and what remains.

Read more: KTH Central Makerspace · Examples from other universities: LTH X-Lab: FAQ

21. I have no time for course development – what support is there?

Status: In planning

Support from SCI MakerSpace staff for your first activity is part of the planning, but what support SCI will give for the course development itself – such as time, teaching assistants or project funding – has not yet been decided. Time is one of the constraints the programme analyses raise most often; see also question 32. Several programmes have hired teaching assistants or run Future Education projects to develop new activities, and the University of North Carolina gives teachers course development grants. A small reusable activity is a good start – but a simple design does not replace time and resources for developing it; see question 22.

Read more: KTH Makerspace Network · Examples from other universities: University of North Carolina: support for teachers

22. Are there examples of assignments, time required and examination of open projects?

Status: Guidance

There are proposed formats and some KTH examples, but no collected example bank yet. Most activities fit one of three sizes: a short prototyping exercise, a design-implement activity within a course, or a full project course. The in-depth section shows at least one KTH example for each size and states whether it has been carried out or is planned. The time figures are a planning aid, not tested norms for SCI MakerSpace; 1.5 credits, for example, is about 40 hours of student work. Also allow for preparation time, especially the first time. Open projects can be assessed on process and understanding, not only on the result; see questions 23 and 31.

In depth: three sizes with KTH examples
Size Time required KTH example Possible examination
Short prototyping exercise A few hours, one session MF2114 (ITM): after a morning-long exercise, students spend an hour building full-scale models of imagined products. Currently running. Demonstration and short reflection
Design-implement activity within a course A few weeks; 1.5 credits is about 40 hours per student SA1007 (Open Entrance): project of about 1.5 credits for 80–100 students. Proposal: to be developed in spring 2027 and introduced in spring 2028. SH1015 (Engineering Physics): about 15 students, working in groups, built a muon detector and designed their own measurements. Carried out from autumn 2023 to autumn 2024, with a large teacher effort. Report, poster and seminar-based reflection (according to the SA1007 proposal)
Project course One study period or longer EH1010 (EECS): students build a robot that solves an everyday problem; the model for the SA1007 proposal. Currently running. Requirements and test report, final presentation and individual examination

Source: KTH’s 2026 programme analyses (SCI and ITM). The examination formats for MF2114 and EH1010 are examples of what the examination can look like.

Read more: CDIO Standards in Swedish (PDF) · Examples from other universities: TU Delft (Delta, 2020): lab courses and a makerspace in applied physics

23. How is the academic level ensured – and how is a project that does not work assessed?

Status: Guidance

The learning outcomes and the examination govern, just as in other course activities – and a project that does not work can still show good learning. This requires the student to be able to explain why and draw well-founded conclusions. Conversely, a working object is no proof of understanding. Assessment can therefore cover modelling, choice of methods, measurements, analysis, documentation and individual understanding – not only whether the prototype works. CDIO Standard 11 describes assessment of both disciplinary knowledge and engineering skills.

Research support: Feisel and Rosa (2005): objectives for lab work, including learning from failure (summary) · Read more: CDIO Standards in Swedish (PDF)

24. How do I examine when students can let AI write code and reports?

Status: Guidance

Assess each student’s own understanding, not just the finished code or report. Combine, for example, code, models, reports or prototypes with individual questions about methods, test results and limitations. Decide in advance how AI may be used and how its use is reported, and include recurring check-ins and an individual oral part. The set-up matters: in a study at upper secondary level, unrestricted AI help during practice led to poorer results on tests without AI, while an AI tutor that gave hints rather than answers reduced the effect. The syllabus and the examiner’s decisions apply; see questions 23 and 31.

Research support: ASEE 2024: oral exams in team projects · Bastani et al. (2025): AI without guardrails

Facilities and equipment

25. What equipment will there be in SCI MakerSpace?

Status: In planning

According to the current plan, SCI MakerSpace will have the machines and tools typical of a makerspace from the start. These include 3D printers, laser cutters, vinyl cutters and a benchtop CNC machine, fully equipped electronics benches for soldering and testing, a bench for textile work, hand tools and cordless power tools for metal and wood, personal protective equipment and basic measuring instruments. Purchases will prioritise what the first courses need, and more will then be bought as needed. If something is missing for your course activity, other spaces in KTH’s network may be able to help by agreement; see question 6.

Read more: Facilities and equipment · Explore KTH’s makerspaces

26. What functions are planned for SCI MakerSpace?

Status: In planning

A flexible space with six main functions, which can be reorganised to meet future needs. According to the current plan, they are: a group and project area with electronics and textile benches; a room for heavier fabrication and noisier machines, with higher training requirements; an entrance area for group work, study space, introductions and simple experiment kits; student project rooms for student-driven CDIO projects; a 3D studio; and GPU stations (powerful computers) for machine learning and AI.

Read more: Facilities and equipment

27. Will existing lab sessions, workshops and research labs be affected?

Status: In planning

The intention is to complement them, not replace them – but some activities may be moved to or linked with SCI MakerSpace, together with the course coordinators and departments concerned. This could be, for example, the building part of a project course or a lab session that becomes more open. Lab sessions, workshops and research labs have their own value, and SCI MakerSpace can also relieve workshops and laboratory engineers by handling introductions and safety training and by letting students do simpler fabrication there themselves. For technicians and research engineers, see questions 48 and 49.

Read more: Explore KTH’s makerspaces · KTH Makerspace Network

Pedagogy, teacher support and progression

28. What teaching approach does a makerspace build on – and how does my role as a teacher change?

Status: Guidance

Active, project- and problem-based learning – and the teacher becomes more of a supervisor than a transmitter of knowledge. Students learn by formulating problems, testing solutions and reflecting, and the teacher asks questions that move learning forward. The role is unfamiliar to many, and it is normal to need time and support. A key is the right degree of structure: overly guided tasks limit learning, while completely open tasks without support leave students on their own; see questions 29 and 30. Aalborg University has worked this way since the 1970s and describes the teacher as a supervisor.

Research support: Edström and Kolmos (2014): PBL and CDIO · Examples from other universities: Aalborg University: the role of teachers in PBL

29. Does the initiative mean we should abandon “theory first”?

Status: Guidance

No. The question is where an exploratory activity adds most – before or after the theory – not whether the theory should go. KTH’s basis for the programme analyses describes a move from theory first towards a hybrid model, in which a challenge can also create the need for knowledge. In some subjects, theory first is still a deliberate choice, for example when experimenting without prior knowledge would be risky or when discovering the theory independently would take unreasonably long. ITM’s Sustainable Production Development programme has put more theory first in some difficult courses, with better results according to the feedback. See also question 28.

Research support: Edström and Kolmos (2014): PBL and CDIO

30. How can I make an existing lab session more open?

Status: Guidance

Start by opening one step at a time, not the whole lab session. Keep a guided first part where students learn the equipment and method, and add an open part where they choose the question, measurement setup or analysis themselves. The steps can be: first confirm a known result, then discover with guidance, and finally investigate independently. Let students justify their choices before they start, and assess justifications and conclusions, not only whether the measured values came out right. Research on physics labs recommends lab sessions that train experimental skills, where students make their own decisions and compare data with models. Safety requirements apply as usual.

Research support: Holmes and Wieman: Introductory physics labs (2018) · Read more: Carnegie Mellon: lab instruction styles

31. How do I make sure every student achieves the learning outcomes when working in a group?

Status: Guidance

The group is the learning environment, but assessment concerns the individual. Start from the learning outcomes and choose evidence that shows what each student can do: short individual reflections or logbooks, recurring check-ins during the project, peer and self-assessment, and individual oral presentations. KTH’s course syllabi already state that everyone in a group is responsible for the group’s work and that each student in an oral examination must be able to account for the whole task and solution. Experiences from Chalmers and from American design courses show that peer assessment and short oral examinations can make individual contributions and understanding visible. See also question 23.

Read more: KTH: LH221V on examination, including group work · Research support: ASEE 2024: oral exams in team projects

32. How do I learn the space myself – and do I get support the first time I run an activity?

Status: In planning

Introduction and support for teachers are part of the planning, but scope and timing have not yet been decided. One possible set-up is help towards self-help: first you try the students’ assignment with support, then you run the activity with the staff, and after that you take on more responsibility yourself. The support needed depends on the activity and your experience, and safety and staffing requirements still apply once you know the space. It is a good idea to take the safety training first. To get to know a makerspace before SCI MakerSpace opens, you can try KTH Central Makerspace, planned to open in spring 2027 and to be open to staff as well. See also question 33.

Read more: KTH Central Makerspace · Examples from other universities: Lawrence University: makerspace pedagogy – how and why (blog, 2019)

33. What educational support and courses are available to me as a teacher?

Status: In planning

KTH’s courses in teaching and learning in higher education are already available, and KTH Central Makerspace is developing a training package for teachers who want to bring practical project work into their courses. KTH Makerspace Network also shares experiences from the educational pilots. The courses offer more depth: LH233V on project-based and challenge-driven teaching and LH221V on examination, including group work. Introduction to the equipment and support in SCI MakerSpace are covered in question 32. Teaching assistants and doctoral students who supervise should receive the same introduction and a briefing on the supervisor role; Stanford, for example, trains dedicated student assistants for making courses. Aalborg University offers an open course in PBL supervision.

Read more: KTH Central Makerspace: project description · Examples from other universities: Stanford: making@stanford

34. How do students’ skills develop from the first year to the degree project?

Status: Guidance

Students gradually take on more responsibility: from well-defined tasks with basic tools early on, to integrated projects and, at second-cycle level, research-related projects and degree projects. This responsibility covers problem formulation, choice of methods, modelling, testing and analysis – not only using more machines. Progression can also mean a harder but more limited task. Authorisations for equipment are built up in parallel. Master’s students with a bachelor’s degree from another university may lack the early activities and need an introduction based on their previous knowledge. CDIO Standard 5 calls for at least one basic and one advanced design-implement experience in the curriculum.

Read more: CDIO Standards in Swedish (PDF) · Examples from other universities: TU Delft (Delta, 2020): lab courses and a makerspace in applied physics

35. How do the activities fit together across a whole programme – and who plans the progression?

Status: Guidance

Progression is planned at programme level, by programme directors together with course coordinators, starting from what the programme already does. Several programmes already have sequences of lab sessions and projects, for example Vehicle Engineering, Nuclear Energy Engineering, Computer Science and Electrical Engineering. Programme directors and course coordinators can map where students practise design, building, testing and project work, and then fill gaps and avoid repetition. Sometimes a limited activity is enough; other programmes need a larger change. Also make the progression visible to students, for example in programme information and course introductions. DTU and Linköping University have programmes with a sequence of design-implement projects.

Examples from other universities: DTU: article on CDIO projects in the B.Eng. programmes (PDF) · Linköping University: syllabus for a CDIO project course in applied physics (PDF)

Safety and responsibility

36. Have you thought about safety?

Status: In planning

Yes, safety is a fundamental condition when premises, equipment, introduction, authorisations and staffing are planned. SCI draws on experience from established makerspaces and KTH’s joint safety work and adapts it to the risks of SCI’s premises, equipment and activities. A welcoming environment does not mean that all equipment may be used without training. Conditions and responsibilities must be clear before activities take place. Responsibility does not rest on the individual teacher alone but follows KTH’s regular procedures; see questions 38 and 51.

Read more: KTH Makerspace Network · KTH Prototype Center: news on access for tuition-fee-paying students

37. Can students experiment freely in SCI MakerSpace – even with chemicals, biological material or high voltage?

Status: Guidance

No. Openness is about open questions and broad accessibility, not free access to all equipment. Students can formulate problems and choose methods, while access to equipment and materials is to be strictly controlled. Work with hazardous chemicals, biological material, radiation sources or high voltage normally belongs in the subject’s own labs, with supervision and risk assessment. Which activities SCI MakerSpace can accommodate has not yet been decided and is determined by the local risk assessment; see question 51. The maker approach can still be used in the labs, and in SCI MakerSpace students can build measurement setups and holders to use there.

Read more: KTH: guideline on the work environment (PDF, Swedish) · Examples from other universities: USC: training levels

38. What competence do I need as a teacher – and who is responsible for what?

Status: Guidance

You do not need to be an expert on all the equipment to use SCI MakerSpace in your teaching. The need for introduction, technical support and supervision depends on the activity. Responsibilities follow the syllabus and KTH’s usual division: the examiner is responsible for the examination, and the starting point is that SCI MakerSpace staff handle the technology and the course handles the subject; see question 19. Who does what – including safety and incidents – must be clear before the activity runs. Staffing, support and teachers’ workload are part of the planning and are agreed for each activity. Students at KTH are covered by personal injury insurance on KTH premises, except during the reception weeks.

Read more: KTH: guideline on course syllabus, grading and examination (PDF, Swedish) · KTH: personal injury insurance for students · Examples from other universities: DTU Skylab: course agreement (PDF)

Benefits and follow-up

39. Is there evidence that makerspaces make a difference?

Status: Guidance

Yes, studies report positive associations, but several are based on observations that do not show causality. Hilton and colleagues found, at three universities, associations between makerspace involvement and engineering design self-efficacy. A randomised field experiment in a physics course showed that physical experience of a phenomenon improved students’ results (Kontra et al. 2015). This supports physical work in general, including lab sessions, but does not show that a makerspace adds more than other learning environments. The results give reason to develop and evaluate such environments, but are no guarantee of the same outcome at SCI. Follow-up is therefore part of the planning.

Research support: Hilton et al. (2020): three universities · Kontra et al. (2015): physical experience and learning

40. What is meant by saying that SCI MakerSpace can be a counterweight to AI?

Status: Guidance

That SCI MakerSpace can safeguard human encounters, collaboration and hands-on skills – not that it is against AI. AI can support idea work, calculations and programming. But when AI can act as both conversation partner and teacher, there is a risk that students meet each other and their teachers less often. In SCI MakerSpace, students and teachers can build, test ideas – including AI’s suggestions – and learn together. KTH Makerspace Network is linked to the principle Vibrant campus within Future Education. Studies report positive results for belonging and self-efficacy, but the studies we have reviewed do not show that makerspaces reduce AI-related social isolation.

Research support: Andrews et al. (2021): belonging and self-efficacy · Read more: KTH Makerspace Network and Vibrant campus

41. How do we know it works – is the activity followed up?

Status: In planning

Yes, follow-up is part of the planning. KTH Makerspace Network has goals of increased use, more practical and experimental learning and more interdisciplinary collaboration, and experiences from educational pilots are shared between the schools. SCI’s own follow-up can cover learning, use and the experiences of teachers and students. The number of visits or prototypes made is a useful operational measure but does not on its own show any educational effect. Feedback from teachers and students is welcome at any time.

Read more: KTH Makerspace Network: goals · Examples from other universities: HEMI: network for best practice

Collaboration, research and rights

42. Can students work on open problems and sustainability, with real clients?

Status: Guidance

Yes, this is one of the strengths of a makerspace. Open problems, where the answer is not given, train students to formulate requirements, choose methods and handle uncertainty. A wicked problem goes further: stakeholders have different needs and the goals conflict, for example low cost, low environmental impact, repairability and good accessibility. Let students justify their trade-offs and discuss what the prototype or model cannot settle. Clients can be companies, research groups, public agencies or organisations, and KTH already arranges such collaborations through its makerspaces, as does Aalto Design Factory. KTH Central Makerspace is also planning a living lab for sustainability. See also question 43.

Read more: KTH: real challenges with KTH students · Examples from other universities: Aalto Design Factory

43. How are companies and start-ups connected to SCI MakerSpace?

Status: In planning

Mainly through courses and projects; the forms for SCI MakerSpace have not yet been decided and will start from the educational mission. Companies and start-ups can contribute real problems, technical expertise, feedback and contacts, for example through challenges in courses, buildathons (intensive build events), guest lectures and presentations. KTH already offers such collaborations through its makerspaces. DTU Skylab and Aalto Design Factory are examples where students, teachers and companies meet in the same environment. Students who want to start a company get support from KTH Innovation.

Read more: KTH: real challenges with KTH students · Examples from other universities: DTU Skylab: about Skylab and its expansion

44. How do students move on from SCI MakerSpace to research labs?

Status: Guidance

SCI MakerSpace can be a bridge to research, but not a shortcut into the labs. Research labs have their own safety rules and equipment that requires specific authorisation, and therefore cannot be opened freely to students. The way there is through courses with research-related projects, degree projects, summer jobs and contact with research groups. In SCI MakerSpace, students can build prototypes, test rigs and measurement setups for research-related projects. Doctoral students and researchers can also use SCI MakerSpace, for example to build test rigs; at Spaces in Flemingsberg, students, doctoral students and researchers work side by side.

Read more: KTH Flemingsberg: Spaces

45. Who owns ideas and prototypes developed in SCI MakerSpace?

Status: Facts and decisions

The same rules apply as elsewhere at KTH. Questions about intellectual property, physical prototypes and confidentiality are handled according to KTH’s rules and the agreements that apply to the project. Student projects, employees’ work and company collaborations can have different conditions, and ownership of a physical prototype is a different question from the rights to an idea. Confidential projects cannot always be carried out in an open, shared environment. KTH Innovation provides support on idea development, protection and agreements.

Read more: KTH Innovation: FAQ on agreements and patents

Practical matters and contact

46. Who can use SCI MakerSpace, and how do you get access?

Status: In planning

Everyone at KTH is to be able to use it after an introduction and safety training, under KTH’s decision on the schools’ makerspaces; the detailed conditions are being developed now. The focus is on SCI’s programmes, and the plan is that SCI courses may have priority at agreed times. Students from other schools, exchange students and master’s students admitted to KTH from another university are covered in the same way as other KTH students. What applies to visitors enrolled at another university, for example degree project students, has not yet been decided. Companies take part mainly through courses and projects; see question 43. Students with disabilities can get support through Funka, KTH’s disability support.

Read more: KTH Library (news): makerspaces for everyone at KTH · Access and introduction

47. When will SCI MakerSpace open, what are the opening hours and whom do I contact?

Status: In planning

SCI MakerSpace at Teknikringen 8 is currently planned to open in late September 2027, and opening hours will be set before the opening. Both staffed hours and hours for open use will be published then. Contact: director [name, email]. Costs are covered in question 20. More about the initiative, educational activities and premises is available under About SCI MakerSpace, In education and projects and Facilities and equipment.

Read more: Explore KTH’s makerspaces

Technicians and support services

48. How will my role as a technician or research engineer be affected?

Status: In planning

How the roles will be designed has not yet been decided, but the intention is for SCI MakerSpace to complement workshops and labs, not replace them; see question 27. In established makerspaces, the work often focuses more on introducing, supervising and supporting students than on making things for others. This can be a new task that requires time and support. Technicians and research engineers are central to making the space work, and how existing expertise can be used and developed is part of the planning. Changes in duties are handled according to KTH’s regular forms of employer–employee cooperation.

Examples from other universities: Stanford: making@stanford · Georgia Tech: Invention Studio

49. Who is responsible for maintenance, service and purchasing of equipment?

Status: In planning

Responsibility for operation, maintenance, service and purchasing is part of the planning and will be decided before activities start. Established makerspaces often have clear procedures for fault reporting, preventive maintenance and responsibility per machine. KTH Central Makerspace is to share models and procedures that the schools’ spaces can adapt, and KTH Makerspace Network highlights standardised equipment that can be shared by larger student groups. For course activities that depend on a specific machine, there should be a back-up plan.

Read more: KTH Central Makerspace: project description · KTH Makerspace Network

50. What professional development is available for technicians and other staff?

Status: In planning

A dedicated set-up for SCI MakerSpace has not yet been decided, but KTH’s joint initiatives and the regular performance reviews provide a basis. Staff need both technical expertise and the ability to introduce and supervise students. KTH Makerspace Network is developing joint introduction material for students, teachers and researchers, and KTH Central Makerspace is to be a resource for training users. Internationally, training on equipment is often combined with pedagogy; at Stanford, dedicated staff handle operations and maintenance so that supervisors and student assistants can focus on teaching. Needs for professional development are discussed in the performance reviews.

Read more: KTH Makerspace Network · Examples from other universities: Stanford: making@stanford

51. Who is responsible for the work environment, and how are risk assessments done?

Status: Facts and decisions

As elsewhere at KTH: responsibility for the work environment follows the usual allocation of work environment tasks. Under the Swedish Work Environment Act, students are to a large extent treated as employees, and KTH’s work environment policy also covers students. Risk assessments for premises, equipment and activities are carried out before the start and followed up in the systematic work environment management. Noise, dust, ventilation and chemical handling are part of the risk assessments. KTH Makerspace Network is developing a joint model for safety work, while each space has its own specific requirements. Safety representatives and the work environment function are natural partners in the planning.

Read more: KTH: guideline on the work environment (PDF, Swedish) · KTH Makerspace Network

52. What applies to lone working and access in the evenings and at weekends?

Status: In planning

Rules for opening hours, access outside staffed hours and lone working have not yet been decided; they will be set based on the risk assessments. Common practice is to avoid lone working and to use higher-risk equipment only when trained staff are present. Until the rules for SCI MakerSpace are decided, KTH’s existing rules for premises and laboratories apply.

Read more: KTH Central Makerspace · Examples from other universities: USC: training levels

53. How is SCI MakerSpace booked in the timetable, and how are material costs allocated?

Status: In planning

It has not yet been decided how booking is linked to timetabling or how material costs are allocated between course, department and SCI MakerSpace. So check with the director before the timetable is set, so that times, supervision and materials can be planned; see questions 17 and 20. Within KTH’s initiative, a shared booking system is mentioned as a possible common function for the schools’ makerspaces.

Read more: KTH Central Makerspace: project description

54. How do I inform students about SCI MakerSpace – and how is personal data handled?

Status: Guidance

Refer students to KTH’s makerspaces on the student web and to the SCI MakerSpace student FAQ, in Swedish and English. KTH Makerspace Network is planning joint communication to students, from the web to activities during the reception period. Personal data needed for access, safety training and booking is handled according to KTH’s rules on personal data. KTH’s makerspaces plan to confirm completed safety training through a joint Canvas course.

Read more: Explore KTH’s makerspaces · KTH Makerspace Network · Questions and answers for students

Terms

  • Makerspace: a learning environment where students design, build and test (the Swedish text also uses makermiljö). SCI MakerSpace refers to SCI’s space at Teknikringen 8.
  • KTH Central Makerspace: KTH’s shared makerspace in KTH Library, planned to open in spring 2027.
  • KTH Makerspace Network: KTH’s project for collaboration between the schools’ makerspaces and the central space.
  • CDIO: Conceive, Design, Implement, Operate; an international framework for engineering education that KTH co-founded in 2000.
  • PBL: problem- and project-based learning, where students learn by working on real problems.
  • Design-implement activity: a course activity in which students design, build and test a solution.
  • Authorisation: the right to use certain equipment after completing an introduction and training.
  • Maker licence (körkort): collective term for the safety training and authorisations required to use the equipment in a makerspace.
  • Course coordinator and examiner: the course coordinator leads the delivery of the course; the examiner is responsible for the design of the examination and for grading.
  • Risk assessment: a review of the risks in premises, equipment and activities, and of the measures to manage them.
  • Status label: Facts and decisions for decided matters, In planning for what is being developed and may change, and Guidance for advice and experience.

Last reviewed: [date]