Till innehåll på sidan
Till KTH:s startsida

Insights in paper and paperboard performance by fiber network micromechanics

Tid: Ti 2019-10-22 kl 13.15

Plats: Seminar room, Dept. of Solid Mechanics, Teknikringen 8D, Stockholm (English)

Ämnesområde: Solid Mechanics

Licentiand: August Brandberg , Hållfasthetslära (Inst.)

Granskare: professor Kristofer Gamstedt, Uppsala Universitet, institutionen för teknikvetenskaper, tillämpad mekanik

Huvudhandledare: Artem Kulachenko, Hållfasthetslära (Inst.); Sören Östlund, Hållfasthetslära (Inst.); Carl Dahlberg, Hållfasthetslära (Inst.); Rami Mansour, Hållfasthetslära (Inst.)

Exportera till kalender

Abstract

Fiber networks are ubiquitous due to their low cost and high ratio of mechanical performance to weight. Fiber networks made of cellulose fibers from trees are used as information carriers (paper) and as packaging (board). Often the ideal product is both mechanically sturdy and possible to print on. This thesis investigates the underlying reasons for the mechanical performance of paper and board through the discretization and direct simulation of every fiber in the network.

In Paper A the effect of fiber-fiber bond geometry on sheet stiffness is investigated. Many packaging products seek to maximize the bending stiffness by employing stiff outer layers and a bulkier layer in the middle. In bulky sheets, the fibers are frequently uncollapsed resulting in a more compliant bonded segment. Because all the loads in the network are transferred via the bonds, such compliance can cause unexpectedly large decreases in mechanical performance. Although many models have been presented which aim to predict the tensile stiffness of a sheet, these predictions tend to overestimate the resulting stiffness. One reason is that the bonds are generally considered rigid. By finite element simulations, we demonstrated the effect of the lumina configuration on the stiffness of the bonded segment on the scale of single fiber-to-fiber bonds, and that the average state of the fiber lumen has a marked effect on the macroscopic response of fiber networks when the network is bulky, has few bonds, or has a low grammage.

Compression strength is central in many industrial applications. In paper B we recreated the short span compression test in a simulation setting. The networks considered are fully three-dimensional and have a grammage of 80 to 400 gsm, which is the industrially relevant range. By modeling compression strength at the level of individual fibers and bonds, we showed that fiber level buckling or bifurcation phenomena are unlikely to appear at the loads at which the macroscopic sheet fails.

In paper C, we developed a micromechanical model to study the creation of curl in paper sheets subjected to a moisture gradient through the sheet. A moisture gradient is always created during the printing process, which may lead to out-of-plane dimensional instability. We showed that the swelling anisotropy of individual fibers bonded at non-parallel angles causes an additional contribution to the curl observed on the sheet level.

urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-260374